FixVault
Home › GMC › 2011 › Canyon 4D Pickup, 2.9 9 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 2.9L - Repair Instructions › Repair Instructions › Fuel Level Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Fuel Tank Module Locking Tab
    GM1766564Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank module. Refer to Fuel Tank Module Replacement .
  2. Disconnect the fuel level sensor electrical connector from the module cover.
  3. Disengage the locking tab (1) on the module bucket.
  4. Slide the fuel level sensor downward off from the module bucket.
About FixVault