FixVault
Home › GMC › 2011 › Canyon 4D Pickup, 3.7 E, 4WD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 3.7L - Repair Instructions › Repair Instructions › Camshaft Position Sensor Replacement - Intake › Installation Procedure

Installation Procedure

  1. Lightly lubricate the O-ring seal with clean engine oil.
    2. Fig 1: View Of Intake Camshaft Sensor
    GM858173Courtesy of GENERAL MOTORS CORP.
  2. Install the intake CMP sensor into the cylinder head.
  3. Add sealer GM P/N 12346004 (Canadian P/N 10953480) to the CMP sensor bolt threads.
    4. CAUTION: Refer to Fastener Caution .
  4. Install the intake CMP sensor bolt.

    Tighten:  Tighten the CMP sensor bolt to 10 N.m (89 lb in).

    5. Fig 2: View Of Intake CMP Sensor And CMP Sensor Electrical Connector
    GM1350719Courtesy of GENERAL MOTORS CORP.
  5. Connect the engine wiring harness electrical connector to the intake CMP sensor.
About FixVault