FixVault
Home › GMC › 2011 › Canyon 4D Pickup, 5.3 P, 4WD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 5.3L - Repair Instructions › Repair Instructions › Accelerator Pedal Position Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of APP Sensor
    GM1352013Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
  2. Remove the APP sensor nuts.
  3. Remove the APP sensor from the vehicle.
About FixVault