Generator Control Module Coolant Pump Replacement (Right)

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Generator Control Module Right Coolant Pump

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Drain the cooling system. Refer to Generator Control Module Cooling System Draining and Filling . Raise the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the engine shield. Refer to Engine Shield Replacement . Remove the generator control module coolant pump hose (pump to pump) Refer to Generator Control Module Coolant Pump Hose Replacement (Pump to Radiator) , Generator Control Module Coolant Pump Hose Replacement (Pump to Pump) . Remove the radiator surge tank outlet hose. Refer to Generator Control Module Coolant Inlet Hose Replacement .
1	Generator Control Module Coolant Pump Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Generator Control Module Coolant Pump TIP: Disconnect electrical connector.

Callout

Component Name

Preliminary Procedures

Generator Control Module Coolant Pump Bolt (Qty: 2)

CAUTION:

Tighten
9 N.m (80 lb in)

Generator Control Module Coolant Pump
TIP: Disconnect electrical connector.