FixVault
Home › GMC › 2012 › Yukon Base, RWD › Repair and Diagnosis › External Pages › Different variant/trim › Section 16 (Hybrid/EV Cooling System) › Repair Instructions › Generator Control Module Coolant Radiator Replacement

Generator Control Module Coolant Radiator Replacement

WARNING: This page is about a different variant/trim than selected.
Fig 1: View Of Generator Control Module Coolant Radiator
GM1970781Courtesy of GENERAL MOTORS COMPANY
Generator Control Module Coolant Radiator Replacement

Callout Component Name

Preliminary Procedures

  1. Drain the cooling system. Refer to Generator Control Module Cooling System Draining and Filling .
  2. Remove radiator air upper baffle and deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement (Yukon) , Radiator Air Upper Baffle and Deflector Replacement (Cadillac) .
  3. Remove the condenser. Refer to Air Conditioning Condenser Replacement (Gas) .
  4. Remove transmission cooler pipes. Refer to Transmission Fluid Cooler Pipe Replacement .
  5. Remove the generator control module coolant outlet hose. Refer to Generator Control Module Coolant Outlet Hose Replacement .
  6. Remove the generator control coolant pump hose (pump to radiator). Refer to Generator Control Module Coolant Pump Hose Replacement (Pump to Radiator) , Generator Control Module Coolant Pump Hose Replacement (Pump to Pump) .
1 Radiator Tab (Qty: 2)
Procedure 
Push tabs in and lift up on generator control module coolant radiator.
2 Generator Control Module Coolant Radiator.
About FixVault