Installation Procedure
WARNING: This page is about a different car, the 2012 GMC Terrain and 2012 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Install the brake caliper.
- Hold the brake caliper guide pin stationary and install the brake caliper guide pin bolts (1) and tighten to 27 N.m (20 lb ft).
- Assemble the brake hose fitting bolt (1) and the 2 new brake hose fitting gaskets (2) to the font brake hose fitting (3).
- Install the brake hose assembly and tighten the brake hose fitting bolt to 40 N.m (30 lb ft).
- Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) , Hydraulic Brake System Bleeding (Pressure) .
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
CAUTION:
Refer to Fastener Caution .
NOTE:
Install new brake hose fitting gaskets.