Installation Procedure
WARNING: This page is about a different car, the 2012 GMC Terrain and 2012 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Install the wheel speed sensor (1) to the steering knuckle.
- Install the wheel speed sensor bolt (1) and tighten to 10 N.m (89 lb in).
- Install the front brake hose bracket nut (1) and tighten to 10 N.m (89 lb in).
- Connect the wheel speed sensor electrical connector.
- Install the front wheel speed sensor harness to the retainers on the front brake hose.
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
CAUTION:
Refer to Fastener Caution .