FixVault
Home › GMC › 2014 › Terrain SLT, 4D Utility › Repair and Diagnosis › Suspension › Wheel Alignment › Wheel Alignment System › Repair Instructions › Rear Camber Adjustment

Rear Camber Adjustment

    Fig 1: Locating Upper Control Arm-To-Frame Fastener
    GM933977Courtesy of GENERAL MOTORS COMPANY
  1. Loosen the upper control arm-to-frame fastener enough to allow movement.
    2. NOTE:

    The frame of the vehicle is slotted, turning the cam nut will move the camber in to the designated location.

  2. Rotate the upper control arm-to-frame fastener in the direction necessary to the correct the camber measurement.
  3. Snug the upper control arm-to-frame fastener, do not tighten at this time.
  4. Reinspect the rear camber specifications and adjust as necessary.
    5. CAUTION:

    Refer to Fastener Caution .

  5. Hold the nut and tighten the upper control arm-to-frame bolt to 164 N.m (121 lb ft).
  6. Repeat the procedure for the other rear wheel.
About FixVault