FixVault
Home › GMC › 2016 › Canyon SL › Repair and Diagnosis › Body & Frame › Towing Systems › Trailer Brake Control System › Repair Instructions › Trailer Brake Power Control Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: Trailer Brake Power Control Module
    GM4500353Courtesy of GENERAL MOTORS COMPANY
  1. Install Trailer Brake Power Control Module (1).
    2. Fig 2: Trailer Brake Power Control Module Bolt
    GM4500339Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install Trailer Brake Power Control Module Bolt (1) and tighten 9 N.m (80 lb in)
  3. Connect the electrical connector.
  4. Install Spare Tire
  5. Program the trailer brake power control module. Trailer Brake Power Module Programming and Setup
About FixVault