FixVault
Home › GMC › 2016 › Canyon SL › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Negative Cable Replacement (LWN) › Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection 
    2. Fig 1: Fuse Block Cover
    GM4161306Courtesy of GENERAL MOTORS COMPANY
  2. Open the fuse block cover (1).
  3. Remove Battery Negative Cable Fastener (2).
  4. Remove Battery Negative Cable (3).
    5. Fig 2: Battery Negative Cable Ground Fastener
    GM4161308Courtesy of GENERAL MOTORS COMPANY
  5. Remove Battery Negative Cable Ground Fastener (2).
  6. Remove Battery Negative Cable (1)
    7. Fig 3: Body Harness Connector And Battery Current Sensor
    GM3802801Courtesy of GENERAL MOTORS COMPANY
  7. Electrical Connector (1) Disconnect @Battery Current Sensor (2).
  8. Detach the battery current sensor from the battery tray.
  9. Raise and support the vehicle. Lifting and Jacking the Vehicle .
  10. Remove Underbody Splash Shield. Underbody Splash Shield Replacement »Remove
    11. Fig 4: Electronic Power Steering (EPS) Connector And Battery Negative Cable Connector
    GM3802928Courtesy of GENERAL MOTORS COMPANY
  11. Disconnect the electronic power steering (EPS) connector (2), from the battery negative cable connector, attached to the front frame crossmember.
    12. Fig 5: Battery Negative Cable Frame Ground Fastener And Battery Negative Cable Terminal
    GM3802927Courtesy of GENERAL MOTORS COMPANY
  12. Remove Battery Negative Cable Frame Ground Fastener (2).
  13. Remove Battery Negative Cable (1).
    14. Fig 6: Engine Ground Cable Stud
    GM4160344Courtesy of GENERAL MOTORS COMPANY
  14. Remove Engine Ground Cable Stud (1).
  15. Remove Battery Negative Cable (2).
  16. Lower the vehicle.
    17. Fig 7: Battery Negative Cable
    GM4160436Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Note the routing of the battery negative cable within the engine compartment.

  17. Carefully remove the battery sensor along with the battery negative cable from the vehicle (1)
About FixVault