FixVault
Home › GMC › 2016 › Canyon SL › Repair and Diagnosis › Engine Mechanical › Exhaust System › Repair Instructions › Exhaust Pipe Replacement › Installation Procedure

Installation Procedure

    Fig 1: Exhaust Pipe Fasteners
    GM4088670Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Clean and lubricate the exhaust isolators for ease of installation.

  1. Install a NEW gasket (3)
  2. Install Exhaust Pipe (2)
    3. CAUTION:

    Refer to Fastener Caution .

  3. Exhaust Pipe Fasteners (1) Tighten 50 N.m (37 lb ft)
    4. Fig 2: Exhaust Pipe Fasteners
    GM4088792Courtesy of GENERAL MOTORS COMPANY
  4. Connect Exhaust Front Pipe (2) @Exhaust Muffler (3)
  5. Exhaust Pipe Fastener (1) Tighten 45 N.m (33 lb ft)
  6. Connect Exhaust System Insulator, Hanger, Bracket Exhaust System Insulator, Hanger, Bracket Replacement (LCV) Exhaust System Insulator, Hanger, Bracket Replacement (LFX) 
  7. Connect Heated Oxygen Sensor - Sensor 2 Heated Oxygen Sensor Replacement - Sensor 2
  8. Lower the vehicle.
About FixVault