Installation Procedure
WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.
- Install the EBCM (1) to the BPMV.
- Install the EBCM bolts (1) and tighten in a cross pattern to 3 N.m (27 lb in).
- Connect the EBCM electrical connector.
- Install the transfer case skid shield, if equipped. Transfer Case Skid Shield Replacement
- Program the EBCM. Control Module References
CAUTION:
Refer to Fastener Caution .