FixVault
Home › GMC › 2016 › Canyon SL › Repair and Diagnosis › Steering › Steering Wheel And Steering Column › Repair Instructions › Steering Column Replacement › Installation Procedure

Installation Procedure

    Fig 1: Steering Column
    GM3742758Courtesy of GENERAL MOTORS COMPANY
  1. Position the steering column (1) in the vehicle.
    2. Fig 2: Steering Column Nut
    GM3742754Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install Steering Column Nut (1) and tighten 22 N.m (16 lb ft)
  3. Connect the steering column electrical connectors.
  4. Install Steering Column Lower Trim Cover.Steering Column Lower Trim Cover Replacement 
    5. Fig 3: Intermediate Steering Shaft And Upper Bolt
    GM3742737Courtesy of GENERAL MOTORS COMPANY
  5. Install Intermediate Steering Shaft (1) @Steering Column.Intermediate Steering Shaft Replacement 
  6. Install Instrument Panel Steering Column Opening Closeout.Instrument Panel Steering Column Opening Closeout Replacement
  7. Install Instrument Panel Assembly. Instrument Panel Assembly Replacement
About FixVault