FixVault
Home › GMC › 2016 › Terrain SL, Gas › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pump Replacement (AWD) › Installation Procedure

Installation Procedure

    Fig 1: Power Steering Pump
    GM4038920Courtesy of GENERAL MOTORS COMPANY
  1. Install Power Steering Pump (2)
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install Power Steering Pump Bolt (1) and tighten 22 N.m (16 lb ft)
    3. Fig 2: Power Steering Pump Bolt
    GM4038917Courtesy of GENERAL MOTORS COMPANY
  3. Install Power Steering Pump Bolt (1) and tighten 22 N.m (16 lb ft)
    4. Fig 3: Power Steering Gear Inlet Hose
    GM4038912Courtesy of GENERAL MOTORS COMPANY
  4. Install Power Steering Gear Inlet Hose Seal (2)

    Install a NEW seal.

    5. CAUTION:

    Refer to Component Fastener Tightening Caution .

  5. Power Steering Gear Inlet Hose (1) @Power Steering Pump Install and tighten 34 N.m (25 lb ft)
    6. Fig 4: Power Steering Fluid Cooling Pipe Clamp
    GM4038911Courtesy of GENERAL MOTORS COMPANY
  6. Install Power Steering Fluid Cooling Pipe (2) @ Power Steering Fluid Reservoir - Lower
  7. Install Power Steering Fluid Cooling Pipe Clamp (1) @ Power Steering Fluid Reservoir - Lower
    8. Fig 5: Power Steering Fluid Reservoir Outlet Hose Clamp
    GM4038910Courtesy of GENERAL MOTORS COMPANY
  8. Install Power Steering Fluid Reservoir Outlet Hose (2) @ Power Steering Fluid Reservoir - Lower
  9. Install Power Steering Fluid Reservoir Outlet Hose Clamp (1) @ Power Steering Fluid Reservoir - Lower
  10. Install Catalytic Converter-Right Side Catalytic Converter Replacement - Right Side (LFX)
  11. Install Drive Belt Drive Belt Replacement
  12. Install the right front tire and wheel assembly. Tire and Wheel Removal and Installation
  13. Fill and bleed the power steering system. Power Steering System Bleeding 
  14. Install Intake Manifold Cover Intake Manifold Cover Replacement
About FixVault