FixVault
Home › GMC › 2017 › Acadia SL › Repair and Diagnosis › Electrical › Instrument Panel System Displays And Gauges › Diagnostic Information and Procedures › DTC B124F: Universal Serial Bus (USB) Programming › Circuit/System Verification

Circuit/System Verification

  1. Ignition » On / Vehicle » In Service Mode
  2. Verify DTC B124F is not set.
    • If the DTC is set 
    1. Perform all necessary programming and setup procedures for the control module:P16 Instrument Cluster
    2. Verify the DTC does not set.
      • If the DTC sets » Replace the component:P16 Instrument Cluster
      • If the DTC is not set
    3. All OK.
    • If the DTC is not set 
  3. All OK.
About FixVault