FixVault
Home › GMC › 2017 › Acadia SL › Repair and Diagnosis › Engine Performance › Fuel Delivery › Engine Controls And Fuel - 2.5L (LCV) - Repair Instructions › Repair Instructions › Engine Oil Pressure Sensor Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
  2. Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
    3. Fig 1: Oil Pressure Sensor Electrical Connector
    GM4375295Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect Electrical Connector (1)
    4. Fig 2: Battery Negative Cable And Ground Stud
    GM4375606Courtesy of GENERAL MOTORS COMPANY
  4. Remove Battery Negative Cable Ground Stud (1)
  5. Reposition Battery Cable (2)
    6. Fig 3: Engine Oil Pressure Sensor
    GM4375489Courtesy of GENERAL MOTORS COMPANY
  6. Remove Engine Oil Pressure Sensor (1)
About FixVault