FixVault
Home › GMC › 2017 › Acadia SL › Repair and Diagnosis › External Pages › Different car › Section 30 (Antilock Brake System) › Repair Instructions › Electronic Brake Control Module Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: EBCM
    GM3425145Courtesy of GENERAL MOTORS COMPANY
  1. Install the EBCM (1) to the BPMV.
    2. Fig 2: EBCM bolts
    GM3425144Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the EBCM bolts (1) and tighten to 6 N.m (53 lb in).
  3. Connect the EBCM electrical connector.
    4. Fig 3: Windshield Washer Solvent Container Filler Tube
    GM3425143Courtesy of GENERAL MOTORS COMPANY
  4. Install the windshield washer solvent container filler tube (1). Refer to Windshield Washer Solvent Container Filler Tube Replacement (Sedan with CE1)Windshield Washer Solvent Container Filler Tube Replacement (Sedan with CE4)Windshield Washer Solvent Container Filler Tube Replacement (Coupe) .
  5. Program the EBCM. Refer to Electronic Brake Control Module Programming and Setup .
About FixVault