FixVault

Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear window into the opening. Refer to Adhesive Installation of Rear Windows .
  2. Install the rear window lower seal, if equipped.
  3. Connect the rear window defogger electrical connectors.
  4. Install the rear window radio antenna connector.
  5. Connect the OnStar® antenna, if equipped.

    Check the radio and OnStar® system to verify reception.

  6. Install the left and right quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement .
  7. Close the rear compartment lid.
  8. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.