Removal Procedure

Fig 1: Identifying Generator, Electrical Harness Connector & Nut

Courtesy of GENERAL MOTORS COMPANY

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
Reposition the positive battery cable boot at the generator terminal.
Disconnect the engine harness electrical connector (1) from the generator.
Remove the positive battery cable nut (2) at the generator.
Remove the positive battery cable terminal (3) from the generator.
Release the drive belt tensioner and reposition the drive belt. Refer to Drive Belt Replacement .

Fig 2: Idler Pulley Bolt And Generator

Courtesy of GENERAL MOTORS COMPANY

Remove the idler pulley bolt (1) and idler pulley (2). Refer to Drive Belt Idler Pulley Replacement .
Remove the generator bolts (3).

NOTE:

When removing the generator from the vehicle, it may be necessary to maneuver the generator to remove it from the vehicle.