FixVault
Home › GMC › 2017 › Terrain SL, Gas › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pump Replacement (FWD) › Installation Procedure

Installation Procedure

    Fig 1: Power Steering Pump And Bolts
    GM4038920Courtesy of GENERAL MOTORS COMPANY
  1. Install Power Steering Pump (2)
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install and tighten Power Steering Pump Bolts (1) (Qty: 2) to 22 N.m (16 lb ft)
    3. Fig 2: Power Steering Pump Bolt
    GM4038914Courtesy of GENERAL MOTORS COMPANY
  3. Install and tighten Power Steering Pump Bolt (1) to 22 N.m (16 lb ft)
    4. Fig 3: Power Steering Gear Inlet Hose And Seal
    GM4038912Courtesy of GENERAL MOTORS COMPANY
  4. Install Power Steering Gear Inlet Hose Seal (2)

    Install a NEW seal.

    5. CAUTION:

    Refer to Component Fastener Tightening Caution .

  5. Install and tighten Power Steering Gear Inlet Hose (1) @ Power Steering Pump to 34 N.m (25 lb ft)
    6. Fig 4: Power Steering Fluid Cooling Pipe And Clamp
    GM4038911Courtesy of GENERAL MOTORS COMPANY
  6. Install Power Steering Fluid Cooling Pipe (2) @ Power Steering Fluid Reservoir - Lower
  7. Install Power Steering Fluid Cooling Pipe Clamp (1) @ Power Steering Fluid Reservoir - Lower
    8. Fig 5: Power Steering Fluid Reservoir Outlet Hose And Clamp
    GM4038910Courtesy of GENERAL MOTORS COMPANY
  8. Install Power Steering Fluid Reservoir Outlet Hose (2) @ Power Steering Fluid Reservoir - Lower
  9. Install Power Steering Fluid Reservoir Outlet Hose Clamp (1) @ Power Steering Fluid Reservoir - Lower
  10. Install Drive Belt. Refer to Drive Belt Replacement
  11. Install the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
  12. Fill and bleed the power steering system. Refer to Power Steering System Bleeding 
  13. Install Intake Manifold Cover. Refer to Intake Manifold Cover Replacement
About FixVault