Section 19 (Data Communication System - Diagnostic Information And Procedures)
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Diagnostic Information and Procedures
- Control Module U Code List
- DTC B1000: Electronic Control Unit
- DTC B1001: Option Configuration
- DTC B101D: Electronic Control Unit Hardware
- DTC B101E: Electronic Control Unit Software
- DTC C056D: Electronic Control Unit Hardware
- DTC C056E: Electronic Control Unit Software
- DTC P0601-P0607, P060A-P060C, P062F, P16E9-P16F0, or P262B: Control Module Memory/Processor
- DTC U0001: High Speed CAN Communication Bus
- DTC U0020: Low Speed CAN Bus
- DTC U0028: MOST Bus
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- Repair Verification
- DTC U0029: MOST Bus
- DTC U0073 or U2100: CAN Bus/Control Module Communication Bus A
- DTC U0074: Control Module Communication Powertrain Expansion CAN Bus
- DTC U0075: Control Module Communication Object Detection CAN Bus
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U0077: Control Module Communication Chassis Expansion CAN Bus
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U0078: Control Module Communication Low Speed CAN Bus
- DTC U0100 - U02FF: Control Module (except U01B0)
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U0100 - U02FF: Control Module (U01B0)
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U0300 - U0336: Control Module
- DTC U0400 - U05FF: Control Module
- DTC U1340-U135F: Control Module
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U1500-U15FF: Control Module
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U1814: Powertrain Wake-Up Communication
- DTC U1833: Lost Communication with Electronic Brake Control Module on Chassis Expansion CAN Bus
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U184A: Lost Communication with Body Control Module on Low Speed CAN Bu
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U18A2: Lost Communication with Fuel Pump Driver Control Module
- Diagnostic Instructions
- DTC Descriptors
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U18B9-U18BF: Primary/Secondary High Speed CAN Bus Subnet
- DTC U2098: MOST Communication Enable
- DTC U2099: High Speed Communication Enable
- DTC U209E: Object Detection Control Module High Speed Communication Enable Circuit 1
- DTC U209F: Object Detection Control Module High Speed Communication Enable Circuit 2
- DTC U2101: CAN Bus Maximum List of Control Modules
- DTC U2160-U2231: Control Module
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U2616: Fuel Pump Driver Control Module Lost Communication with ECM
- Diagnostic Instructions
- DTC Descriptors
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- Symptoms - Data Communications
- Scan Tool Does Not Power Up
- Scan Tool Does Not Communicate with Chassis High Speed GMLAN Device
- Scan Tool Does Not Communicate with High Speed GMLAN Device
- Scan Tool Does Not Communicate with Low Speed GMLAN Device
- Data Link References