Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Remove Front Bumper Fascia. Refer to Front Bumper Fascia Replacement

Fig 1: Front Parking Assist Alarm Sensor

Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector.
Remove Front Parking Assist Alarm Sensor (1)

Fig 2: Sensor Bracket/Fascia Mating Surface

Courtesy of GENERAL MOTORS COMPANY

NOTE:

Do Not grind off alignment tabs.

Sand/grind sonic weld plastic residue from the fascia (1).