FixVault
Home › GMC › 2018 › Acadia SL › Repair and Diagnosis › External Pages › Different car › Section 338 (Antilock Brake System) › Repair Instructions › Electronic Brake Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Electronic Brake Control Module with Brake Pressure Modulator Valve. Refer to Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement 
    2. Fig 1: Electronic Brake Control Module Bolts
    GM4260195Courtesy of GENERAL MOTORS COMPANY
  2. Remove Electronic Brake Control Module Bolts (1) (Qty: 4)
    3. Fig 2: Electronic Brake Control Module
    GM4260197Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do NOT pry the components apart.

  3. Remove Electronic Brake Control Module (1)
    4. Fig 3: Electronic Brake Control Module Seal
    GM4260198Courtesy of GENERAL MOTORS COMPANY
  4. Remove Seal (1)
About FixVault