FixVault
Home › GMC › 2018 › Acadia SL › Repair and Diagnosis › External Pages › Different car › Section 352 (Suspension Control System) › Repair Instructions › Electronic Suspension Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the load floor trim panel. Refer to Load Floor Trim Panel Replacement (All Terrain)
  2. Remove the spare tire.
  3. Remove the acoustic treatment.
    4. Fig 1: Electronic Suspension Control Module And Bracket Nuts
    GM4311115Courtesy of GENERAL MOTORS COMPANY
  4. Remove Electronic Suspension Control Module Bracket Nuts (1) (Qty: 3)
  5. Remove Electronic Suspension Control Module (2)
    6. Fig 2: Electronic Suspension Control Module And Bracket
    GM4311128Courtesy of GENERAL MOTORS COMPANY
  6. Remove the electronic suspension control module (1) by releasing the tab as indicated on the electronic suspension control module bracket (2).
  7. Disconnect Electrical Connector @ Electronic Suspension Control Module
About FixVault