FixVault
Home › GMC › 2018 › Acadia SL › Repair and Diagnosis › External Pages › Different car › Section 352 (Suspension Control System) › Repair Instructions › Front Suspension 4 Corner Leveling System Position Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
    2. Fig 1: Front Leveling System Position Sensor Harness Clip And Front Compartment Splash Shield
    GM4408993Courtesy of GENERAL MOTORS COMPANY
  2. Separate the front leveling system position sensor harness clip (1) from the front compartment splash shield (2).
    3. Fig 2: Front Leveling System Position Sensor And Electrical Connector
    GM4317797Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the electrical connector (1) from the front leveling system position sensor (2).
    4. Fig 3: Link Rod And Leveling System Position Sensor
    GM4317878Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the link rod (1) from the leveling system position sensor (2).
    5. Fig 4: Leveling System Position Sensor Bracket Nut
    GM4317900Courtesy of GENERAL MOTORS COMPANY
  5. Remove the leveling system position sensor bracket nut (1).
    6. Fig 5: Front Leveling System Position Sensor And Bracket
    GM4317910Courtesy of GENERAL MOTORS COMPANY
  6. Remove the front leveling system position sensor and bracket (1) from the vehicle.
About FixVault