Installation Procedure

Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.
Courtesy of GENERAL MOTORS COMPANY

Install the EBCM (1) to the BPMV.
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Install the EBCM bolts (1) and tighten in a cross pattern to 3 N.m (27 lb in).
Connect the EBCM electrical connector.
Install the transfer case skid shield, if equipped. Transfer Case Skid Shield Replacement
Program the EBCM. Control Module References