FixVault
Home › GMC › 2018 › Canyon SL › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Front Wheel Speed Sensor Replacement (With ZR2) › Removal Procedure

Removal Procedure

WARNING:

Refer to Brake Dust Warning .

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
  3. GM4774684Courtesy of GENERAL MOTORS COMPANY

    Front Wheelhouse Liner Bolt (1) - Remove - Front Wheelhouse Liner Replacement

  4. Carefully pull the lower edge of the wheelhouse liner outward to access the wheel speed sensor electrical connector.
  5. GM4774685Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Front wheelhouse liner not shown for clarity.

    Electrical Connector (1) - Disconnect

  6. GM4774688Courtesy of GENERAL MOTORS COMPANY

    Clip (1) - Release

  7. GM4774691Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) - Release

  8. GM4774692Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) - Release

  9. GM4774695Courtesy of GENERAL MOTORS COMPANY

    Front Wheel Speed Sensor Bracket Bolt (1) - Remove

  10. GM4774698Courtesy of GENERAL MOTORS COMPANY

    Front Wheel Speed Sensor Bolt (1) - Remove

  11. GM4774701Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do NOT pry or lever against the wheel speed sensor to remove.

    Front Wheel Speed Sensor (1) - Remove

About FixVault