FixVault
Home › GMC › 2018 › Canyon SL › Repair and Diagnosis › External Pages › Different car › Section 109 (Disc Brake System) › Repair Instructions › Front Brake Caliper Guide Pin Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the brake caliper pins, pin clips, and brake pad springs for damage or excessive corrosion and replace, if necessary.
    2. Fig 1: Brake Pad Spring
    GM3684062Courtesy of GENERAL MOTORS COMPANY
  2. Install the brake pad spring (1).
    3. Fig 2: Brake Caliper Pins
    GM3684057Courtesy of GENERAL MOTORS COMPANY
  3. Carefully drive the brake caliper pins (1) into the brake caliper.
  4. Ensure the brake caliper pins are fully seated in the brake caliper.
    5. Fig 3: Disc Brake Pad Pin Clips
    GM3684051Courtesy of GENERAL MOTORS COMPANY
  5. Install the disc brake pad pin clips (1).
  6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
About FixVault