Endgate Handle Replacement

WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Endgate Handle

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the pickup box endgate access hole cover. Refer to Pickup Box Endgate Access Hole Cover Panel Replacement . Remove the rearview driver information camera. Refer to Rearview Driver Information Camera Replacement
1	Endgate Handle Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Endgate Handle Assembly NOTE: Disconnect the actuator rods. Release the lower retainer tabs

Callout

Component Name

Preliminary Procedure

Remove the pickup box endgate access hole cover. Refer to Pickup Box Endgate Access Hole Cover Panel Replacement .
Remove the rearview driver information camera. Refer to Rearview Driver Information Camera Replacement

Endgate Handle Bolt (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Endgate Handle Assembly

NOTE:

Disconnect the actuator rods.
Release the lower retainer tabs