FixVault
Home › GMC › 2018 › Terrain SL › Repair and Diagnosis › Electrical › Charging Systems › 12 V Starting And Charging System › Repair Instructions › Battery Positive Junction Block Cable Replacement › Installation Procedure

Installation Procedure

    Fig 1: Battery Positive Junction Block Cable And Retainer
    GM4583647Courtesy of GENERAL MOTORS COMPANY
  1. Install Battery Positive Junction Block Cable (1).
  2. Engage Retainer (2) - [2x]
    3. Fig 2: Battery Positive Junction Block Cable Nut
    GM4583646Courtesy of GENERAL MOTORS COMPANY
  3. Install Battery Positive Junction Block Cable (2).
    4. CAUTION:

    Refer to Fastener Caution

  4. Install Battery Positive Junction Block Cable Nut (1) and tighten [2x] 12 N.m (106 lb in)
    5. Fig 3: Junction Block Cover And Retaining Tab
    GM4583403Courtesy of GENERAL MOTORS COMPANY
  5. Install Junction Block Cover (2).
  6. Engage Retaining Tab (1) - [2x]
    7. Fig 4: Battery Distribution Engine Compartment Fuse Block Cover
    GM4578539Courtesy of GENERAL MOTORS COMPANY
  7. Close Battery Distribution Engine Compartment Fuse Block Cover (1).
  8. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (KL9) 
About FixVault