Removal Procedure
- Disable the SIR system. SIR Disabling and Enabling
Roof Rail Rear Assist Handle (2) - Remove - Roof Rail Rear Assist Handle Replacement (Crew Cab, Extended Cab)
Body Lock Pillar Garnish Molding (5) - Remove - Body Lock Pillar Garnish Molding Replacement (Crew Cab, Extended Cab)Body Lock Pillar Garnish Molding Replacement (Regular Cab)
Remove the rear seat position center reading and courtesy lamp (1). Rear Seat Position Center Reading and Courtesy Lamp Replacement
Remove the passenger side center pillar upper trim panel (2). Center Pillar Upper Trim Panel Replacement
Reposition the headlining trim panel (1) to gain access to the remote control door lock receiver.
- Disconnect the electrical connector.
- Release the 2 inner tabs and pull downward to remove the remote control door lock receiver (2).
Do not attempt to repair or alter the head impact energy-absorbing material glued to the headliner or to the garnish trims. If the material is damaged, replace the headliner and/or the garnish trim. Failure to do so could result in personal injury.
If a vehicle is equipped with a head curtain inflator module ensure that the inflator module and tether are undamaged. If tether or curtain airbag are damaged in any way, they must be replaced.
Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator module is damaged in any way, it must be replaced.