FixVault
Home › GMC › 2019 › Sierra 2500 HD Base, 2D Pickup, Gas › Repair and Diagnosis › Brakes › Brakes Control Systems › Trailer Brake Controls › Repair Instructions › Trailer Brake Power Control Module Replacement (JD9) › Installation Procedure

Installation Procedure

  1. GM3268822Courtesy of GENERAL MOTORS COMPANY

    Install the trailer brake power control module (1).

  2. GM3268818Courtesy of GENERAL MOTORS COMPANY

    Holding the trailer brake power control module nuts stationary, install the trailer brake power control module bolts (1) and tighten to 9 N.m (80 lb in).

  3. Connect the trailer brake power control module electrical connector.
  4. Raise and secure the spare tire and wheel assembly.
About FixVault