FixVault
Home › GMC › 2019 › Sierra 2500 HD Base, 2D Pickup, Gas › Repair and Diagnosis › External Pages › Different car › Section 3029 (Programming And Setup - All Systems) › Repair Instructions › K33 HVAC Control Module: Programming And Setup › Unsuccessful Programming Recovery

Unsuccessful Programming Recovery

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 GMC Sierra 3500 HD, 2018 GMC Sierra 2500 HD, 2018 GMC Sierra 1500, 2018 Chevrolet Silverado 3500 HD, and 2018 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

If programming a control module is not successful, perform the following procedure:

  1. Verify the control module, data link connector and programming tool connections are secure and the tool software is up to date.
  2. Ignition - On/Vehicle - In Service Mode
  3. Perform the SPS function: Programming

    Verify the control module programming is successful.

    • If the programming is not successful 
    1. Ignition/Vehicle - Off - For greater than 1 min
    2. Ignition - On/Vehicle - In Service Mode
    3. Perform the SPS function: Programming
      • If the programming is not successful - Replace the component: K33 HVAC Control Module
      • If the programming is successful
    4. All OK.
    • Go to next step: If the programming is successful 
  4. All OK.
About FixVault