Circuit/System Verification
- Ignition - On / Vehicle - In Service Mode
- Operate the component:Driver Door - Open
Verify the scan tool parameter:Body Control Module - Driver Door Ajar Switch=Active
- If not the specified state
Refer to:Door Ajar Indicator Malfunction
- Go to next step: If the specified state
- If not the specified state
- Operate the component:Driver Door - Closed
Verify the scan tool parameter:Body Control Module - Driver Door Ajar Switch=Inactive
- If not the specified state
Refer to:Door Ajar Indicator Malfunction
- Go to next step: If the specified state
- If not the specified state
- Operate the component:Driver Door - Open
Verify the scan tool parameter:Keyless Entry Control Module - Driver Door Ajar Switch=Active
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- Operate the component:Driver Door - Closed
Verify the scan tool parameter:Keyless Entry Control Module - Driver Door Ajar Switch=Inactive
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- All OK.