Component Testing
WARNING: This page is about a different car, the 2021 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the S86 Vehicle Stability Control System Switch.
- Test for infinite resistance between Terminal 1 and the ground terminal 6 with the switch in the open position.
- If less than infinite resistance
Replace the S86 Vehicle Stability Control System Switch.
- Go to next step: If infinite resistance
- If less than infinite resistance
- Test for less than 5 Ω between Terminal 1 and the ground terminal 6 with the switch in the closed position.
- If 5 Ω or greater
Replace the S86 Vehicle Stability Control System Switch.
- Go to next step: If less than 5 Ω
- If 5 Ω or greater
- All OK.