Fastener Specifications
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Propeller Shaft Hub Clamp |
| Transfer Case Front Output Shaft Boot Clamp |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Axle Propeller Shaft Bolt | 30 N.m (22 lb ft) |
| Front Axle Propeller Shaft Heat Shield Bolt | 9 N.m (80 lb in) |
| Front Axle Propeller Shaft Heat Shield Stud | 9 N.m (80 lb in) |
| Front Propeller Shaft Bolt | 90 N.m (66 lb ft) |
| Propeller Shaft Bearing Support Bolt | 58 N.m (43 lb ft) |
| Rear Propeller Shaft Bolt | 90 N.m (66 lb ft) |