Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Install the video processing module (1) to the video processing module bracket (3).
- Video Processing Module Nut (1) - Install and tighten [2x] 9 N.m (80 lb in)
Connect the electrical connectors.
- Install the video processing module (1) with bracket.
Video Processing Module Bracket Rear Bolt (2) - Install and tighten 9 N.m (80 lb in)
- Video Processing Module Bracket Front Bolt (1) - Install and tighten [2x] 9 N.m (80 lb in)
- Radio Speaker Amplifier - Install - Radio Speaker Amplifier Replacement
- Perform the necessary programming and setup procedure: Control Module References
CAUTION:
Refer to Fastener Caution .