Removal Procedure

Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (KL9)
Courtesy of GENERAL MOTORS COMPANY

Evaporative Emission Front Hose (1) - Remove - Evaporative Emission Front Hose Replacement
Courtesy of GENERAL MOTORS COMPANY

Evaporative Emission Canister Purge Tube (1) - Remove - Evaporative Emission Canister Purge Tube Replacement
Courtesy of GENERAL MOTORS COMPANY

Evaporative Emission Canister Purge Solenoid Valve (1) - Remove - Evaporative Emission Canister Purge Solenoid Valve Replacement
Drive Belt (1) - Remove - Drive Belt Replacement
Courtesy of GENERAL MOTORS COMPANY

Generator Shield (3) - Remove - Generator Shield Replacement (LTG)
Courtesy of GENERAL MOTORS COMPANY

Generator Nut (1) - Loosely install
Raise and support the vehicle. Lifting and Jacking the Vehicle
Courtesy of GENERAL MOTORS COMPANY

Battery Positive Cable Nut (1) - Remove
Starter Solenoid Cable (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Stud (1) - Remove
Lower the vehicle.
Courtesy of GENERAL MOTORS COMPANY

Electrical Connector (3) - Disconnect
Generator Nut (2) - Remove
Stud (1) - Remove

NOTE:

It will be necessary to rotate and maneuver the generator in order to remove.