FixVault

Installation Procedure

  1. Battery (3) - Install
    GM5335421Courtesy of GENERAL MOTORS COMPANY
  2. Battery Hold Down Retainer (2) - Install
  3. CAUTION:

    Refer to Fastener Caution .

  4. Battery Hold Down Retainer Bolt (1) - Install and tighten 22 N.m (16 lb ft)
  5. Battery Hold Down Retainer (2) - Install
    GM5335354Courtesy of GENERAL MOTORS COMPANY
  6. Battery Hold Down Strap Bolt (1) - Install and tighten 6 N.m (53 lb in)
  7. Retainer (3) - Engage
  8. Install the engine control module bracket. Engine Control Module Bracket Replacement
  9. Battery Distribution Engine Compartment Fuse Block (2) - Install - Battery Distribution Engine Compartment Fuse Block Replacement (LCV, LGX) , or Battery Distribution Engine Compartment Fuse Block Replacement (LSY)
    GM5156226Courtesy of GENERAL MOTORS COMPANY
  10. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection