FixVault
Home › GMC › 2021 › Acadia SL › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.5L (LCV) - Repair Instructions › Repair Instructions › Engine Oil Pressure Sensor Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the right front tire and wheel assembly. Tire and Wheel Removal and Installation
  3. Electrical Connector (1) - Disconnect
    GM4375295Courtesy of GENERAL MOTORS COMPANY
  4. Battery Negative Cable Ground Stud (1) - Remove
    GM4375606Courtesy of GENERAL MOTORS COMPANY
  5. Battery Cable (2) - Reposition
  6. Engine Oil Pressure Sensor (1) - Remove
    GM4375489Courtesy of GENERAL MOTORS COMPANY
About FixVault