Removal Procedure
CAUTION:
Do not use solvent of any type when cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as damage to the gasket surfaces and throttle body assembly may result.
Use care in cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as sharp tools may damage the gasket surfaces.
CAUTION:
Do not use any solvent that contains Methyl Ethyl Ketone (MEK). This solvent may damage fuel system components.
NOTE:
Do NOT prop open the throttle blade with the ignition key in the ON position as it MAY set a diagnostic trouble code (DTC).
- Clean ALL dirt and debris from the area around the throttle body.
- Air Cleaner Outlet Duct - Remove - Air Cleaner Outlet Duct Replacement
- Electrical Connector (1) - Disconnect
- Throttle Body Bolt (1) - Remove [4x]
- Throttle Body (1) - Remove
- Throttle Body Seal (2) - Remove
The seal is reusable, inspect the seal and replace if damaged.