FixVault
Home › GMC › 2021 › Acadia SL › Repair and Diagnosis › External Pages › Different car › Section 188 (Antilock Brake System) › Repair Instructions › Front Wheel Speed Sensor Replacement - Right Side › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2020 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4353813Courtesy of GENERAL MOTORS COMPANY

    Wheel Speed Sensor (1) - Install

  2. GM4353811Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

    Wheel Speed Sensor Bolt (1) - Install and tighten 9 N.m (80 lb in)

  3. GM4353810Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) @Strut Assembly - Secure

  4. GM4353809Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) @Wheelhouse - Secure

  5. Retainer (2) @ Strut Assembly - Secure
  6. GM4353808Courtesy of GENERAL MOTORS COMPANY

    Wheel Speed Sensor Harness Pass Through Grommet (1) - Secure

  7. Install the tire and wheel assembly. Tire and Wheel Removal and Installation
  8. Lower the vehicle.
  9. GM4353805Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) @Strut Tower - Secure

  10. GM4353799Courtesy of GENERAL MOTORS COMPANY

    Wheel Speed Sensor Electrical Connector (1) - Connect

  11. Verify the repair is complete. Diagnostic Repair Verification
About FixVault