FixVault
Home › GMC › 2021 › Acadia SL › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Steering Linkage Outer Tie Rod Replacement › Installation Procedure

Installation Procedure

  1. Steering Linkage Outer Tie Rod (1) - Install
    GM5069250Courtesy of GENERAL MOTORS COMPANY
  2. Steering Linkage Outer Tie Rod (1) @ Steering Knuckle - Install
    GM5069193Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Ensure the Outer Tie Rod Boot is not twisted or deformed during assembly. If the boot is twisted or deformed, damage to the boot will occur.

  3. Steering Linkage Outer Tie Rod Nut (1) - Install and tighten
    GM5069140Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution .

    1. First Pass: 35 N.m (26 lb ft)
    2. Final Pass: 90 - 100 degrees
  4. Tighten the steering linkage inner tie rod nut (1) during the front toe adjustment procedure.
    GM5069120Courtesy of GENERAL MOTORS COMPANY
  5. Install the front tire and wheel assembly. Tire and Wheel Removal and Installation
  6. Measure and adjust the front toe. Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
About FixVault