Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Battery Hold Down Retainer Nut | 5 N.m (44 lb/in) |
| Battery Negative Cable @ Battery Sensor Nut | 9 N.m (80 lb/in) |
| Battery Negative Cable Extension Cable @ Frame Rail Fastener | 9 N.m (80 lb/in) |
| Battery Negative Cable Extension Cable @ Shift Cable Bracket Fastener | 22 N.m (16 lb-ft) |
| Battery Negative Cable Ground Fastener | 22 N.m (16 lb-ft) |
| Battery Negative Post Clamp Nut | 4.5 N.m (40 lb/in) |
| Battery Positive Cable @ Battery Distribution Engine Compartment Fuse Block Nut | 12 N.m (106 lb/in) |
| Battery Positive Junction Block Cable Nut | 12 N.m (106 lb/in) |
| Battery Positive Post Clamp Nut | 4.5 N.m (40 lb/in) |
| Battery Sensor Module Fastener | 9 N.m (80 lb/in) |
| Battery Tray Mounting Bolt | 22 N.m (16 lb-ft) |
| Battery Tray Mounting Nut | 22 N.m (16 lb-ft) |
| Engine Wiring Harness Junction Block Mounting Bolt | 7 N.m (62 lb/in) |
| Engine Wiring Harness Junction Block Nut | 4.7 N.m (42 lb/in) |
| Generator Mounting Bolt (LTG, LYX) | 22 N.m (16 lb-ft) |
| Generator Mounting Nut (LTG, LYX) | 22 N.m (16 lb-ft) |
| Generator Mounting Stud (LTG, LYX) | 9 N.m (80 lb/in) |
| Starter Bracket Fastener (Large Bolt) | 58 N.m (43 lb-ft) |
| Starter Bracket Fastener (Small Bolt) | 22 N.m (16 lb-ft) |
| Starter Motor Mounting Bolt (LTG) | 22 N.m (16 lb-ft) |
| Starter Motor Mounting Bolt (LYX) | 58 N.m (43 lb-ft) |
| Starter Motor Mounting Nut (LYX) | 58 N.m (43 lb-ft) |
| Starter Solenoid Cable @ Battery Distribution Engine Compartment Fuse Block Nut (LTG, LYX) | 12 N.m (106 lb/in) |
| Starter Solenoid Cable @ Generator Nut (LTG, LYX) | 15 N.m (11 lb-ft) |
| Starter Solenoid Cable @ Starter Nut (LTG, LYX) | 12 N.m (106 lb/in) |
| Stud | 22 N.m (16 lb-ft) |