Fastener Specifications
WARNING: This page is about a different car, the 2021 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Airbag Front End Discriminating Sensor | 7.5 N.m (66 lb/in) |
| Airbag Sensing and Diagnostic Module Nut | 9 N.m (80 lb/in) |
| Airbag Side Impact Center Pillar Sensor | 7.5 N.m (66 lb/in) |
| Airbag Side Impact Sensor | 7.5 N.m (66 lb/in) |
| Front Seat Belt Anchor Plate Tensioner Bolt | 6 N.m (53 lb/in) |
| Front Seat Belt Retractor Bolt - Lower | 45 N.m (33 lb-ft) |
| Front Seat Belt Retractor Bolt - Upper | 9 N.m (80 lb/in) |
| Front Seat Belt Retractor D Ring Bolt | 45 N.m (33 lb-ft) |
| Front Seat Belt Tensioner Bolt | 45 N.m (33 lb-ft) |
| Front Seat Inboard Seat Back Airbag Nut | 4.7 N.m (42 lb/in) |
| Front Seat Outboard Seat Back Airbag Nut | 4.7 N.m (42 lb/in) |
| Roof Rail Airbag Fastener | 9 N.m (80 lb/in) |