Installation Procedure

WARNING: This page is about a different car, the 2021 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Front Side Door Inside Handle Cable (1) - Install - Front Side Door Inside Handle Cable Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Outside Handle Cable (1) - Install - Front Side Door Outside Handle Cable Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Door Outside Handle Bracket (1) @ Front Side Door Latch (2) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Locking Rod Knob (1) - Install - Front Side Door Locking Rod Knob Replacement
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution

NOTE:
Install and torque the four latch bolts in proper sequence to prevent damage to the latch mechanism.

Front Side Door Latch Bolt (1) @ Front Side Door Latch (2) - Install and tighten [ 4x ] 9 N.m (80 lb/in)
Connect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Outside Handle Bracket (1) - Install - Front Side Door Outside Handle Bracket Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Window Channel Retainer - Rear (2) - Install - Front Side Door Window Channel Retainer Replacement (Front) , or Front Side Door Window Channel Retainer Replacement (Rear)
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Window Regulator (2) - Install - Front Side Door Window Regulator Replacement
Inspect the door latch and outside handle for proper operation before installing the door trim.