Circuit/System Verification
WARNING: This page is about a different car, the 2021 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Verify DTC B1008 is not set.
- If DTC B1008 is set
- Perform the following procedure/test: Front View Camera Module Learn .
- Verify DTC B1008 is not set.
- If the DTC sets - Replace the component: B174W Frontview Camera - Windshield
- Go to next step: If the DTC is not set
- All OK.
NOTE:If the Front View Camera Module Learn will not complete, refer to Diagnostic Aids.
- Go to next step: If DTC B1008 is not set
- All OK.
NOTE:
This DTC can be set as a history DTC without affecting the operation of the component: B174W Frontview Camera - Windshield