FixVault
Home › GMC › 2021 › Terrain SL › Repair and Diagnosis › External Pages › Different car › Section 169 (Driver Assistance Systems) › Diagnostic Information and Procedures › DTC B101D › Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2021 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Verify DTC B101D is not set.
    • If the DTC is set 
    1. Program the control module: K124 Active Safety Control Module
    2. Ignition - On / Vehicle - In Service Mode
    3. Verify DTC B101D is not set.
      • If the DTC is set

        Replace the appropriate component: K124 Active Safety Control Module

      • Go to next step: If the DTC is not set
    4. All OK.
    • Go to next step: If the DTC is not set 
  3. All OK.
About FixVault