FixVault
Home › GMC › 2021 › Terrain SLT, 4WD › Repair and Diagnosis › Transmission › Power Transfer Unit/Transfer Case - AAM › Repair Instructions - On Vehicle › Fill Plug Replacement › Removal Procedure

Removal Procedure

  1. Raise and suitably support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the power transfer unit heat shield, if equipped. Power Transfer Unit Heat Shield Replacement (M3D transmission with LSY engine) 
  3. GM4573717Courtesy of GENERAL MOTORS COMPANY

    Remove and DISCARD the fill plug (1) and seal.

About FixVault