FixVault
Home › GMC › 2021 › Yukon AT4 › Repair and Diagnosis › Suspension › Suspension Control Systems › Suspension Controls › Repair Instructions › Ride Control Switch Replacement (With Denali) › Removal Procedure

Removal Procedure

  1. GM5515686Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Outer Filler (1) - Remove

  2. GM5596335Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  3. Instrument Panel Fuse Block Access Hole Cover (1) - Remove
  4. GM5596337Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Trim Pad Bolt (1) - Remove

  5. Disconnect the electrical connectors.
  6. Instrument Panel Trim Pad (2) - Remove
  7. GM5596403Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Switch Trim Plate Bolt (1) - Remove

  8. Disconnect the electrical connectors.
  9. Instrument Panel Switch Trim Plate (2) - Remove
  10. GM5605310Courtesy of GENERAL MOTORS COMPANY

    Ride Control Switch (1) @ Instrument Panel Switch Trim Plate - Remove

About FixVault